GMC SIERRA ENGINE

I Have Seen Recommendations To Put Silicone On The Head Bolts, Some Say To Put Some Engine Oil On Them And Some Say Nothing On Them Before...

The Truck Shut Off Plowing. So I Replace The Ignition Module And The Plug Wires And The Coil. It Started Then Shut Off And Will Not Start.

Turn Key To Accept, Only A/c Blower Comes On, No Radio Or Gauges And Will Not Start.

Hello, I Need The Diagram For The Head Gasket. Need To Know How To Tighten Head Bolt And Torque Spec 5.3 2012 Sierra Silverado. The Lbs...

I Have Replaced All Vacuum Lines, Replaced The Following: Egr Valve, Tps, Iac, O2 Sensor, Rebuilt Throttle The Body, Replaced The...

Truck Runs For A Bit Then Shuts Off, Maybe Wait 15-20 Minutes It Starts Back Up. I Replaced Crank Sensor And It Still Does It. Should I Now...

When I Turn The Key To The Crank Position The Starter Cranks The Engine Over, But It Will Not Fire Or Start. When I Move The Key To The On...

Rpm's Spiked, Engine Acted Like It Was Going To Shut Off, Wouldn't Start After I Parked. New Fuel Filter, Still Wouldn't...

Replace The Maf Sensor, Catalytic Converters Are Not Plugged. New Throttle Body And Throttle Plate, No Holes In The Boot Going From The...

Just Need To Know The Steps To Change My Oil Pan Gasket While It Is In The Truck.