GMC Sierra Transmission Clutch
Browse GMC Sierra Transmission Clutch questions and answers. Choose a question that matches your symptoms.
12 discussions
2nd To 3rd Is Grinding Severely While Standing On The...
Truck Initially Had A 5spd 4.3 V6 2wd. I Installed A 2003 5.3l V8 Using The Original 5 Speed.
From The Get Go Shifting Acts As If The...
Asked by rb95
2002 GMC Sierra Clutch
Clutch Pedal Sits About 1/2 " Off Floor. Bled Off No Change In Pedal Height. In Order To Shift You Have To Stand On The Pedal, It Will Hold...
Asked by Steve_Thompson
1995 GMC Sierra Clutch System Isnt Holding Pressure
Ive Recently Replaced My Slave Cylinder After The Old One Sprung A Leak, I Installed It Just Like The Old One Came Out, O-rings And...
Asked by zachbrandon
1993 GMC Sierra Clutch Problem
I Was Driving Up A Large Hill And Went To Shift Down And Had No Clutch, It Was Completely Loose, Managed To Get It Back Into 4th Gear, Once...
Asked by Tylermcgoo
I Have Replaced The Master Cylinder And Slave Cylinder...
I Have Replaced The Master Cylinder And Slave Cylinder On The Clutch And Still No Pedal Pressure...any Ideas?
Asked by Anonymous
92 Gmc Sierra 2500
92 Gmc Sierra 2500 How Do I Remove The Clips Holding The Clutch Line? The Upper Was Push On-pull Off, Is The Lower One Help By A Nut?
Asked by nonmech
1992 GMC Sierra
1992 Gmc Sierra
I Have A 1992 Gmc Sierra 1500 Pick-up 2 Wd. Two Years Ago I Replaced The Clutch And About A Year Ago I Replaced The...
Asked by julieg863
Truck Will Not Go In Gear When The Clutch Is Mashed To...
Truck Will Not Go In Gear When The Clutch Is Mashed To The Floor
Asked by Anonymous
Browse other repair topics
SymptomsClutchComputer TCMCoolerDip StickDriveEstimateFilterFluidFuseGear Position SensorGear SelectorInput Shaft SensorInterchangeLineOverdrivePanParkReplace/RemoveReverseServiceShift SolenoidTorque ConverterVehicle Speed Sensor
Can’t find your issue?
Ask a new GMC Sierra question
