1995 GMC Sierra clutch system isnt holding pressure

1995 GMC SIERRA
25,000 MILES • V8 • 2WD • MANUAL
Avatar
ZACHBRANDON
  • MEMBER
  • 1 POST
Ive recently replaced my slave cylinder after the old one sprung a leak, i installed it just like the old one came out, o-rings and everything, but i cant get the system to hold pressure now....
me and my dad tried bleeding it for about an hour but still have a dead pedal with good pressure at the slave cylinder, any ideas what it could be?
thanks for the help ahead of time.
Oct 7, 2009 at 5:13 PM
Advertisement
Avatar
RASMATAZ
  • ✓ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
If its not leaking and won't hold pressure could be the clutch master cylinder is leaking internally
Oct 7, 2009 at 5:22 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.