GMC CANYON

I Have Put New Bulbs In It, Checked The Fuse Which Is Fine, And The Connection. Wondering If There Could Be Something Wrong With The...

Okay, So My Truck Sat For About A Week. I Went Out To Start It And It Was Dead. Boosted With No Issue. So I Figured Battery So I Pull The...

I Had A Code Po068 And Po101. I Replaced The Maf And Map Sensors. The Code Po068 Is Gone, But I Still Have The Code Po101. After Driving Up...

On My 2012 Gmc Canyon 3.7l I5 When I Accelerate In The Truck And It Gets At Or Above 3,000 Rpm's There Is A Burning Smell That Comes...

My Cel Came On And I Had It Coded. It Was Code Po141 And The Downstream O2 Sensor And One Was Bought And Put On. No Big Deal. However...

Starting In 2011 The Pickup Would Not Start, Wait (panic) About Ten Minutes It Would Start, All Was Well. Happened About Every Six Months...

I Keep Getting This Code. I Have Replaced Hub, Speed Sensor, Rotor, Rotor Bracket. I Do Have Continuity On Wires From Sensor To Module....

Truck Drives Perfectly While I Am Driving Down The Road When I Go To Come To A Stop And Have My Foot On The Brake My Lights Will Dim And...

I Replaced The Steering Rack And Now The Steering Wheel Wont Turn And The Pump And Lines Are Very Hot And Smoke

2006 Canyon Wont Crank, Not Getting Fuel To Top Of Engine. Engine Light Comes On For A Couple Seconds But Is Very Dim. Checked Fuses...