GMC Canyon Brakes
Browse GMC Canyon Brakes questions and answers. Choose a question that matches your symptoms.
9 discussions
2008 GMC Canyon Rear Breaks
Im Trying To Change My Rear Breaks And The Only Problem Is That The Drum Wont Come Of I Try To Wiggle It Of I Even Try To Pry It Of And...
Asked by romero1
Parking Brake Stuck On
The Parking Brake Is Stuck Engaged. I Have Tried Repeatedly Pushing And Releasing The Parking Brake Pedal And Rocking The Truck Back And...
Asked by Edward Gofton
C0035 Left Front Wheel Speed Sensor Circuit Fault
I Keep Getting This Code. I Have Replaced Hub, Speed Sensor, Rotor, Rotor Bracket. I Do Have Continuity On Wires From Sensor To Module. It...
Asked by mark frizzell
Front Rotor Removal
How Do I Remove The Front Rotor On A 2007 Gmc Canyon 4x4? I Have Removed The 6 Bolts That Hold The Stud Plate And The 4 Bolts That Hold The...
Asked by Tbone53
Trying To Change Rotor And I Removed The Hub Assembly...
Trying To Change Rotor And I Removed The Hub Assembly But There Is A Black Wire Keeping Me From Removing The Rotor, Looks Like It May Be The...
Asked by chp3456
Brake Pads Fall Off ?
If The Back Plate Of One Of The Brake Pads Fall Off Can It Cause A Severe Grinding Noise During Breaking Also Causes The Truck To Pull To On...
Asked by jewett
Front Disc Brakes
I Was Told I Need Special Tools To Change The Front Disc Brake Pads On A 2006 Gmc Canyon 4x4 Pick-up. Is The Caliper Removal Any More...
Asked by popjitterbug
2004 GMC Canyon Brake Smell And Brakes Initiate...
When I Brake The Brakes Are Initiated. The Pedal Is Firm To The Push So To Speak. Like Pushing On A Brick. The Brake Light Does Not Come On...
Asked by suseen67
Browse other repair topics
Can’t find your issue?
Ask a new GMC Canyon question
