GMC
BodyBrakesClimate ControlDrivetrainElectricalEmissionEngineEngine CoolingExhaustExterior LightFuel SystemGeneralIgnitionInteriorSafetySecuritySteeringSuspensionTiresTrouble CodesWarning Lights
Rough Idle At 600-700 Rpm's
When At 800-900 Rpm Idle Is Fine (put My Foot On Gas With Other Foot On Brake To Achieve Smooth Idle). Problem Seemed To First Begin When I...
Asked by jedidiah543211
Will Not Shift To High Gear
Changed Fluid And Filter In The Transmission. After I Finished I Took The Vehicle For A Test Drive And The Vehicle Wont Shift In High Gear....
Asked by redbone
Swapping Engine Can I Use The PCM In Original Engine
My Question Is, I Swapping My On My Vehicle Listed Above 4.3l Vortec, And The Motor I'm Putting In Is The Same As The One I'm Taking...
Asked by PatW54
MAF Issues, Code P0101
6.0 Blew Up Put In 5.3 From Heads To Pan Used 6.0 Intake And Injectors Runs Fine, But Check Engine Light Comes On With P0101 Code (maf). I...
Asked by Markbexrud
Oil Leak Near The Starter
I Have Changed My Main Engine Seal And Didn’t Stop And Leaks. It Leaks About 3 Quarts A Day And I Have Oil In My Intake.
Asked by Joshuapina
Engine Will Not Crank Over
I Have Owned This Vehicle For A Year. It Has 301,000 Miles On It. The Car Will Be Perfectly Fine Then I Get In The Car And Go To Start It...
Asked by Jodi Reynolds
Engine Noise?
I Changed All The Sensors That The Codes Were Throwing And It Was Still Throwing Those Codes After I Changed Them. So I Changed The Spark...
Asked by Adam Sackler
Service Traction Control/Service Stabilitrak On And...
Service Traction Control On And Off.
Service Stabilitrak On And Off.
Check Engine Light Was On But Disconnected The Negative Battery...
Asked by Nickarend73
Engine Swap Would PCM Work With Different Engine Code
I Was Wondering If A Pcm Would Work If Engine Code Is Different? I'm Swapping Motors On My Vehicle Listed Above And This Code Is W The...
Asked by PatW54
Intermittent Issue Of Dashboard Not Working
Sometimes, Mostly In The Morning, I Start My Truck Up And The Dashboard Lights Don't Come On. The Truck Drives Like Normal Just No...
Asked by adamach29
Ask a new GMC question
