GMC Engine

Browse GMC Engine questions and answers. Choose a question that matches your symptoms.

4,524 discussions


No Spark Have Replaced Ignition Coil?

1998 GMC SIERRA
Have Replaced Ignition Coil Distributor Pickup And Crankshaft Sensor What Next???
2 ANSWERS
1 IMAGE
Asked by jlminer1969

1998 GMC Jimmy Misfire Cylinder 1

1998 GMC JIMMY
My Truck Runs Rough And Emission Engine Code P0301 Indicates A Misfire In Cylinder 1. Erg Valve Is Cleaned And Pvc Valve Is Good. Mass Air...
2 ANSWERS
Asked by trash7070

1998 GMC Truck Wont Start

1998 GMC TRUCK
Over The Last Year My Truck Would Run Rough Sometimes, It Has New Fuel Injectors, Fuel Pump, Upper Manifold, Distributer Cap, Plugs, Wires...
4 ANSWERS
Asked by det61

1998 GMC Sierra Truck Dies

1998 GMC SIERRA
Truck Runs Fine For App. 20 Min. Then Completely Shuts As If Turning Off Ignition
3 ANSWERS
Asked by brenda506

1998 GMC Sierra Cylinder 1 Misfire

1998 GMC SIERRA
I Am Getting A Cylinder 1 Misfire Code Reading For My 1998 Gmc. I Have Changed The Spark Plug, Spark Plug Wire And Distributor Cap. No...
1 ANSWER
Asked by peapackfire

1998 GMC Jimmy Hesitates On Wide Turns, Left Or Right...

1998 GMC JIMMY
Hello, My Car Drives Good After Initial Take Off. I Noticed On Initial Accelerations Turns Going Right Or Left There Is A Slight Hesitation...
11 ANSWERS
Asked by roycar71

1998 GMC Savana Starting Problem

1998 GMC SAVANA
Hi Was Driving My Gmc Savana No Problems Stopped To Get Supply's Went To Start The Van ,it Turns Over But Will Not Start. Have Changed The...
3 ANSWERS
Asked by Nig1584

1998 GMC Sonoma No Power To Starter

1998 GMC SONOMA
Truck Will Start If Jumped From The Starter, But No When Turning The Key In Ignition. Please Help Me.
1 ANSWER
Asked by cathycecil

How Do I Remove A Cut Open Oil Filter.

1998 GMC JIMMY
I Tried Using 2 Separate Oil Wrenches And Screw Driver Before Going To This Option . Currently, I Have It Soaking With Bb Blaster Spray To...
3 ANSWERS
3 IMAGES
Asked by roycar71

1998 GMC Jimmy Once In While Shuts Off When Shifted In...

1998 GMC JIMMY
I Recently Had Po452, Po171, Po174. I Had Fuel Pressure Sensor And Elbow On Top Of Intake Manifold Pleumn From Pcv Valve Replaced. I Took...
2 ANSWERS
Asked by roycar71

Browse other repair topics

Browse by repair topic
SymptomsAir FilterAir Intake Temperature SensorAir Intake TubeBlockCamshaftComputerCoverCrankshaftCrankshaft PulleyCylinder HeadTickDrain PlugFlexplateFlywheelGround StrapHarmonic BalancerIdentificationIdle Air ControlIntake ManifoldInterchangeKnockMAP SensorMass Air Flow SensorMountOil LeakOil ChangeOil CheckOil CoolerOil Fill CapOil FilterOil PanOil Pressure SensorOil PumpOxygen SensorPistonRebuildReplace/RemoveSerpentine BeltStarterSuper ChargerThrottle BodyTiming BeltTiming ChainTune-upTurboVacuum Hose DiagramWiring

    Can’t find your issue?

    Ask a new GMC question