Ford Windstar Electrical

How Do I Program The Computor To Recognize The Key Code Etc.? Changed Ignition And Imobon Ignition Still Have The Light Flashing On Dash.

I Have Removed Three Bolts And Don't See Anything Else Holding It In, But It Will Not Budge.

Torque Wrench Size For Alternator Pulley.

So I Drilled Out The Tumbler Got One From The Salvage Yard, Put That Tumbler In And Changed The Transceiver The Black Ring That Goes Around...

I Put The Key In And It Turned To The On Position, The I Turned It To Start It And (this Is The First Time This Had Ever Happened) It Turned...

I Was Driving Along Fine When It Started Making A Sound And Acting Like It Was Bogging Down, Or In The Wrong Gear. It Also Gave Off A...

My Battery Has A Draw And Even When I Disconnect The Negative Battery Cable It Still Goes Dead. What Could Be The Problem?

2003 Ford Windstar 3.8 V6 The Van Starts Then Dies When You Start It Back Up It Runs For A Minute Then Dies Again. The Battery Light Is On...

Our Alternator Is Making A Chirping Noise. I Would Like A Diagram Of How To Replace It.

The Problem Started With My Wipers Suddenly Started Working On Their Own And Would Not Shut Off. Then #2 Relay And Nader Dash Started...