Ford Ignition
Browse Ford Ignition questions and answers. Choose a question that matches your symptoms.
2,051 discussions
No Power Going To The Ignition Coil
Over The Past Few Months My Truck Has Been Stuttering Going Up Hills Just Before It Downshifts, So I Decided To Change The Distributor Cap...
Asked by NPotgieter
Running Issues
The Truck Will Start, I Can Drive It Around For Any Length Of Time; Meaning Five Minutes Or Forty Five Minutes With No Issues. However, When...
Asked by heartbreakking
No Spark
Unit Quit Running And Will Not Attempt At All. Checked It Out According To Troubleshoot My Vehicle.com Have Power Coming Into And Out Of...
Asked by relicrepair
No Coil Spark
Have No Spark Coming Out Of A Brand New Coil. What Can Cause This To Happen?
Asked by Oldforddog
1989 Ford Festiva Perplexing Problem
This Is A Real Quandary, And I Need Help Please! The Car Runs Great Until You Cut It Off. After It Sits For A Few Minutes, When You Start It...
Asked by Tar Heel
Seems Like There Is No Spark.
I Had A Ticking Valve So I Put Some Marvels In To See If It Was Just Sludge Or What Not, I Then Drove It For About 3 Miles When It Lost...
Asked by dreinha2
1989 Ford 300 6cl Gear On The Ignition Distributor Pin...
A Ford 300 6 Cy The Distributor Gears Sheared The Pin On The Gear On The Distributor What Would Cause That The Head Gasket I Just Fixed...
Asked by jwgoad52
1989 Ford Taurus Ignition Coil
What Kind Of Symptoms Would I Be Experiencing If Ignit. Coil Were Bad? We've Replaced Starter, Alternator, Plugs & Wires And Car Started...
Asked by therese braun
I Am Getting Fire To The Coil But Not From It . I Have...
I Am Getting Fire To The Coil But Not From It . I Have Replaced The Coil And Still No Fire From Coil To Distributer
Asked by Anonymous
Which Distributor Gear Is Needed, The Cast Iron Or...
Which Distributor Gear Is Needed, The Cast Iron Or Steel?
Asked by jconner
Browse other repair topics
Can’t find your issue?
Ask a new Ford question
