Ford Computer Read Codes
Browse Ford Computer Read Codes questions and answers. Choose a question that matches your symptoms.
103 discussions
2003 Ford F-350 Electrical
Thank You For The Timely Reply. I Went Out And Diconnected Both Batteries For About 1/2 Hour To Reset The Computer. I Reconnected Them And...
Asked by uglymac
2003 Ford Falcon
Computer Problem
2003 Ford Falcon 6 Cyl Two Wheel Drive Automatic
What You Need To Do When You Replace The Computer Do You Need To...
Asked by jarec
2003 Ford Expedition Computer Issues
I Have Recently Had The Following Symtoms. Reverse Sensors And Mirror Tilt-down (when In Reverse) Stopped Working. Autolock Feature Stopped...
Asked by pjz12244
Unable To Start The Car
After I Ground The Valves, I Could Start The Car. I Attempt To Carry Out Scanning But Failed To Communicate. Pcm Is Not Communicating With...
Asked by Mamiroro Smith
Please Help
I Have A Ford Festia Ztech 2002 I Have Replaced Both Top And Bottom Lamba Sensor But The Light Wont Go Out And The Codes Still Read The Same...
Asked by jenny64
Been Getting Code 1506 IAC Idle To High
Have An 2002 Ford Explorer Xlt 4wd. After I Had The Valvue Cover Gaskets Replaced Have Been Getting Code 1506 Iac Idle To High. Replaced Iac...
Asked by ml5888
I Drive A 2002 Ford Focus. The Engine Light Is On And...
It Drives Ok But When Stopped At Red Lights It Constantly Revs And Then Stalls. Have Been Told Its A Fuel Problem And Also Have Been Told I...
Asked by leslieb81
2002 Ford Taurus Computer Needs A System Reset
I Had My Car Serviced, I.e. A Complete Tune Up, And Even Replaced The Tps Control, Yet My "check Engine" Light Is Still On. I Took It Back...
Asked by emuxen
2002 Ford F150 Code- Meaning
The Code Reads Fuel Sys 2 Cl- Fault = What Part Do I Need To Buy To Fix The Problem
Asked by bob curtis
Browse other repair topics
Clear CodesDiagnostic Connector ALDLEstimateFuseLimp Mode - Reduced PowerLocationMonitor Not ResettingNo CommunicationProgramRead CodesReplace/RemoveUpdate
Can’t find your issue?
Ask a new Ford question
