Ford Camshaft

I Installed A Roller Chain On My Ford 400cid Engine.i Installed The Crankshaft Sprocket In The 4 Degree Advanced Position.my Question Is Do...

Can't Get The Push Rod Out Of The Old Cylinder And Did Not Get A New One With The New Master Cylinder.

I Am 16 And Would Love To Restore My Car But Dont Have Money Or Time So I Want It To Last But Need To Know What Quites Noise Lifters

I Was Trying To Find Out What Size Hydraulic Cam Would Be Good To Use In My Engine To Make It Thump Really Good Without Having To Do A...

If A Lifter Were Bleeding Down, Not Pumping Up Or Partially Pumped Up, Could A Valve Partially Open? This Is A General Hydraulic Lifter...

The Truck Has A 390 In It And Gas Is Free Flowing From The Tank Into The Pump And Free Flowing Out The Carb Side But Its Like The Cam Wont...

Have A 1969 Ford F-100 Truck With A 4.9l 300 Cid And I Wanted To Know What The Timing Needs To Be Set At And How To Time It.

I Have An Exhaust Lifter That Has Worn On The Bottom Side To The Shape Of The Cam Lobe. All Lifters Were Replaced New About 200 Miles Ago...

Hi, I Was Wondering Why Ryan Didn’t Convert To A Roller Tappet In His 302 Windsor Rebuild. I’m Rebuilding A 68 302 And Was Wondering If...

I Believe This Is A Crate Engine. First I Heard Slight Backfire, Then Something Like Tappet Noise. What Should I Do To Find Problem. Oil...