Dodge Ram Repair Questions and Answers


Trying To Remove Dash To Get To Heater Core

2002 DODGE RAM
I Have Removed Everything All Dash Screw And Bracket Screws On Dash. It Should Roll Down But The Passenger Side Is Loose But The Drivers...
3 ANSWERS
Asked by workingmanmex

No Power From Power Distribution Box

2001 DODGE RAM
I Have Power To The Radio, Wipers Ect. With The Ignition In Off Position And Key Out.if I Pull The Ignition Accessory Fuse From Power...
1 ANSWER
Asked by mike fortney

Driving Light For 1999 Dodge Ram 1500 Truck...

1999 DODGE RAM
The Truck Doesnt Have Them From The Factory And Purchased Used Ones , Parts - Headlamp Swich W/fog Option As Well As Harness For Lights Too...
1 ANSWER
Asked by mack433

How Do I Get The Back Up Lights To Work

1999 DODGE RAM
I Have A 2500 Dodge Ram And The Back Up Lights Wont Come On. I Have Checked The Fuses, The Lights, And Traced The Wire And Everything Looks...
3 ANSWERS
1 IMAGE
Asked by warmblood

1998 Dodge Ram 1500 4x4. 5.2 Not Enough Power

1998 DODGE RAM
It Seem Like It Dont Havs The Power It Should, Like Its Holding Back. Ive Replaced Plugs, Disributor Cap And Button And It Didnt Help. It...
1 ANSWER
Asked by kevin228670

A/c Switch To Defrost At 60-70 Mph, Cruise Control Not...

1997 DODGE RAM
I Have Replaced All Vac Check Valves, Vac Tested All A/c Lines In Cab Including Vac Canister. I Hear What Sounds Like A Large Vac Leak When...
3 ANSWERS
Asked by tmaj9447

I Have Shavings In Transmission Pan

2002 DODGE RAM
My Rpm Gauge Acts Like It Out Of Gear When Driving On 2002 Doge Ram 1500? What Could Be The Problem? It Acts Like It Is Slipping Out Of Gear...
2 ANSWERS
Asked by jbates87

I Am Getting Too Much Gas When Starting

1995 DODGE RAM
What Would Cause My Engine To Over Fuel So Bad As To Choke It Out And Make It Hard To Start When Warm And Cold? I Have Changed The Intake...
1 ANSWER
Asked by Chad.T

2003 Dodge Truck 4.7 Tries To Die When I Stop

2003 DODGE RAM
Tries To Die When I Stop. Then It Picks Back Up
1 ANSWER
Asked by drm

I Need Help With The Front Wheel Bearing Hub Assembly

2003 DODGE RAM
I Am Replacing The Front Hub Bearing Assembly. What Size Socket Do I Need To Remove The Axle Nut
1 ANSWER
3 IMAGES
Asked by Boblev
Ask a new Dodge Ram question