Dodge
BodyBrakesClimate ControlDrivetrainElectricalEmissionEngineEngine CoolingExhaustExterior LightFuel SystemGeneralGlobal KeywordsIgnitionInteriorSafetySecuritySteeringSuspensionTiresTrouble CodesWarning Lights
Code P0113, Intake Temperature Sensor?
I Bought It From Auction, Had These Codes. I Deleted All To See What Stays And It Was The P0113, Even Without The Engine Running. So, I...
Asked by Bhamdoc1973
Gas Cap And Checking Engine Light Is On?
The Display Says Gas Cap And The Checking Engine Light Is On. I've Replaced The Gas Cap, Evap And Checked Vacuum Lines Connected To It....
Asked by Crazydog72
The Engine Shut Off And Will Not Restart?
It Felt Like It Was Running Out Of Fuel. I Can Still Hear The Fuel Pump Work When I Try To Restart It.
Asked by Durk Dabrowski
How To Bleed The Brakes Without A Scan Tool?
Just Replaced The Power Brake Booster. Need To Bleed The System At All 4 Corners. Don't Have A Scan Tool. Can I Bleed Them Without One?...
Asked by Bob Truett
Can The MAP Sensor Be Cleaned?
I Still Can't Get This Started. But I Found That The Map Sensor Was Only Partially Screwed In. And It Was Covered In An Oily Substance....
Asked by dodgepodge
Misfire, No Codes?
It All Started When I Changed The O2 Sensor Right After I Changed Spark Plugs. I Bought The Van A Couple Months Ago And Have Been Doing A...
Asked by Avaloniyem2024
Are You Supposed To Bleed The Radiator After...
Could The Cooling System Be Affected If It's Not Done?
Asked by Need2knonie
No Crank No Start But Have Power?
Okay, I Replaced Pcm With My Vin, So It Was A Plug N Play Because Code P0601 Showed Up And There Was The No Crank No Start Then And After...
Asked by holden melissa59
A/C Compressor Keeps Engaging And Disengaging Then...
I Checked The Pressures, And The Low Side Was High And The High Side Barely Was Reading. Is It That Actual Compressor Or Something Else?
Asked by ChristianL
Ask a new Dodge question