Chevrolet S-10 Repair Questions and Answers
BodyBrakesClimate ControlDrivetrainElectricalEmissionEngineEngine CoolingExhaustExterior LightFuel SystemGeneralIgnitionInteriorSafetySecuritySteeringSuspensionTiresTrouble CodesWarning Lights
Little Bit Of Water Seeps Out The Overflow On First...
When I Start My Truck In The Morning To Idle And Warm Up A Little, Just A Little Bit Of Water Seeps Out The Overflow. It Only Does This When...
Asked by smokeesdad
Will Not Start After Replacing Air Manifold Gasket
Just Finished Replacing The Air Manifold Gasket And Now The Truck Won’t Start. I Don’t Know If It’s The The Cables Or If It Wasn’t...
Asked by elimimanator
Grounding Issue
I Recently Bought The Truck Listed Above From Guy That Had Just Replace The Ignition But It Had I Know Crank No Start. So I Rebuilt The...
Asked by Mitch Roberts
Fuel Pump Not Working And Injectors Not Pulsing
Fuel Pump Works Fine If I Wire It Straight To Battery. Injectors Have Juice With Test Light Just Don't Pulse. What Is Going On? I Am On...
Asked by Awesomebill
Engine Spins, No Fire, No Start
Pickup Was Parked For About 3 Years. I Decided To Get It Running Again, Needed To Replace Gas Tank Cause I Hit A Rock And Put A Hole In Tank...
Asked by cowboyrocks
Replaced Clutch Position Switch And Vehicle Would Not...
Bypassed Switch To Start Engine. Now The Bracket That Holds Clutch And Brake Pedals Under Dash That Goes Into The Body Is Missing The...
Asked by RHW
Could It Be A Gear Positioning Sensor Has Changed
No Reverse Seems Like Gear Shift Linkage Has Changed. Like Drive Moving Forward In Neutral.
Asked by Sloan Doni
After Having Carburetor Rebuilt I Need To Install But...
Rochester Varajet Ll Carburetor Vacuum Ports. Please Help I Had Carburetor Rebuilt Don't Know Where All Hoses Connect To.
Asked by hymz
Misfire Cylinder Three And Code P0303
Changed Plugs,cap And Rotor And New Distributor. Truck Starts But Still Has Miss In Cylinder Three. Coil Changed,no Change In Misfire. Lean...
Asked by Jcanizzo8
Ask a new Chevrolet S-10 question
