Chevrolet
BodyBrakesClimate ControlDrivetrainElectricalEmissionEngineEngine CoolingExhaustExterior LightFuel SystemGeneralGlobal KeywordsIgnitionInteriorSafetySecuritySteeringSuspensionTiresTrouble CodesWarning Lights
Crankshaft Position Sensor And A 2-plug Wire...
I Replaced My Crankshaft Position Sensor, And A 2-plug Wire Driver Side Of Truck Unplugged. I Have No Idea Where To Plug It Back In At It Is...
Asked by James Martin4
Front Differential Wiring And Synchronizing?
I Am Trying To Locate A 12-volt Supply Which Is Triggered Only After The Np246 Transfer Case Is Ready For The Front Differential To Come...
Asked by Roadstar01
High Fuel Pressure Around 78 PSI?
I Replace The Fuel Pump Assembly, And After I Replace It I Check For Fuel Pressure When I Turn The Key To On My Fuel Pressure Gauge Goes Up...
Asked by joe1953
E-brake Not Engaging?
I Had To Have My Brake Booster And Abs Module Replaced. I Picked My Vehicle Up From The Mechanic And Discovered The E-brake Was Not Engaging...
Asked by Jghoward
Oil Pump Gears?
I Took The Oil Pump Off For Cleaning And One Gear Fell Out. How Do They Go Back Together With The Two Circles Together?
Asked by TJMowbray
Can I Get The Valve Cover Bolt Torque Specs?
Valve Cover Bolt Torque Specs Needed.
Asked by TJMowbray
383 Engine Build, How To Lower The Compression?
Hi,
I've Been Watching Ryan's Videos On Building The 383 Engine. I've Got An '85 Chevy K20 That Currently Has A...
Asked by Etedeschi72
The Past Two Days I Have Had To Turn The Key And Give...
I’ve Been Driving The Vehicle The Past Two Days And Had To Turn The Key And Give It Gas In Order For It To Start. I Thought It Was A Fuel...
Asked by azdanno04
Wheels Not Responding To The Accelerator Pedal, Limp...
Car Will Start Up Just Fine And Drives Good For About 3 Minutes And Then Car Goes Limp All You Hear Is Motor Accelerating And No Wheel...
Asked by Willyhndrxx
Ask a new Chevrolet question
