Buick
BodyBrakesClimate ControlDrivetrainElectricalEmissionEngineEngine CoolingExhaustExterior LightFuel SystemGeneralGlobal KeywordsIgnitionInteriorSafetySecuritySteeringSuspensionTiresTrouble CodesWarning Lights
Wheel Well, Inner Splash Shield Missing?
The Car Was Received Without The Passenger Side Wheel Well Inner Sleeve, Which Protects The Accessory Belt And Pulleys From Splashed Water...
Asked by alphaa10
No Power To Fuel Pump, Pump Does Work, Wiring Harness...
Conducted A Continuity Test From Pump Harness To Wires At Back Of Junction Box In Floor Positive Side Ground Side All Beep And Pump Runs...
Asked by Bocutty614
Overheating Issues?
New Radiator, New Radiator Cap, New Thermostat, The Oem Required A New Water Pump, Heater Core Flush, Radiator Flush, And Still Overheating...
Asked by Katie Brashear Stroud
The Headlights And High Beams Stopped Working?
Basically, The Headlights And High Beams All Failed. The Only Thing I Can Do Is Pull The High Beam Flash Switch On The Multifunction / Turn...
Asked by TheMailMan
Codes P0335 And P0336?
2 Things. The Plug Or The Gasket At The Bottom Of The Map Sensor Was Stuck And It Went Down Inside Of Where It Attaches To Rather Than...
Asked by Vgasmen
Noise While Driving, Wheel Bearing?
I Have Just Put A Brand-new Wheel Bearing In This, It Has Brand New Tires On The Front But Still I Am Getting This Roaring Type Of Noise...
Asked by ahartley
Change The Brakes And Rotors Now ABS Light Is On?
Change The Brakes And Rotors Now Abs Light Stability Track Light And Service Traction Control Light Are All On.
Asked by Al Fossett
Lines From Intake To Quick Disconnect Under Brake...
Fuel Hose Diameter For Lines From Intake To Quick Disconnect Under Brake Booster. Also, Size Of Quick Disconnects. I Can't Seem To Find...
Asked by bw74
OBD2 Scan Reveals Unexpected Engine Problems?
Yesterday, I Requested An Obd2 System Scan At Two Local Auto Parts Stores. Just A Routine Check-- It Doesn't Hurt To Be Watchful.
...
Asked by alphaa10
Stalling And Idling Issue?
This Is The Third Time. I'm Doing This Because If You Try To Go Back In. The Model Is Blank, And It Won't Let You Get Past That....
Asked by Vgasmen
Ask a new Buick question
