REPLACE/REMOVE PULLEY SERPENTINE BELT Questions
Bearing In Idler Pulley Is Bad And Needs To Be...
Youtube Shows Wrong Motor.
Asked by Jon David Schools
Droning Noise Consistent When Driving Up To 80klm
The Car Has A Constant Drone That's The Is The Same At All Speeds Up To 80klm. Then Stops At 90klm And Above. More So On An Uphill And...
Asked by Tony Lavidis
Engine Belt Removal, Broken Idler Pulley Assembly
After Some Research, I Believe I Have Cracked The "idler Pulley Assembly". Normally You Put A 3/8" Ratchet Into The Assembly...
Asked by NWeaver1982
Replaced The Idler Pulley Or Tensioner And The Drive...
The Idler Pulley Or Tensioner Broke, So It Started Shredding The Drive Belt. I Replaced Both And Now The Engine Wont Start.
Asked by Rhonda Parrent-Spencer
Shouldn't All The Pulleys Used W/ Serpentine Belt Be...
Ok. My Car Died While Driving Down The Road A Little Over A Week Ago. Due To Our Own Stupidity, I Had To Replace The Radiator. Then I...
Asked by inkd4life
Upper Idler Pulley Replacement?
2001 Altima - Upper Idler Replacement??? Bolt Has Backed Out - Cut An Access Hole In The Wheel Well?
Thx. Bob
Asked by rdletourneau
2000 Dodge Durango Noise
2000 Dodge Durango Automatic 135000 Miles
I Was Told Yesterday That My Waterpump, Tensioner, Idler Pulley And Serpentine Belt Need To...
Asked by kasey2468
1998 Nissan Altima
The Bearing On The Idler Pulley For The Alternator Belt Is Worn, How Can I Remove That Pulley, The Space Is Very Tight?
Asked by BUNS
2002 Ford Windstar Strange Sounds
Noises Problem
2002 Ford Windstar 6 Cyl 118000 Miles
2002 Windstar Has Belt Noise. We Replaced The Water Pump, Idler Pulley And The...
Asked by Justjenn
