PISTON ROD

Need To Know The Torque. I Keep Getting Different Answers.

I Have Been Losing Of My Oil Pressure Whenever I Come To A Complete Stop. So I Changed My Oil Pressure Switch And That Didn't Help. Then...

Is It Possible To Do Rod Bearings And Main Bearings On My 4.3 Liter Vtec On My 1998 Blazer Four Wheel Drive Without Pulling The Motor Out Of...

I Have A Ford Tuarus With A 3.8 I Replaced Connecting Rod Bearings And Crank Shaft Mains Now Engine Wont Turn Over?

Hello, I Got A Code That My Rod Knock Sensor Is Bad And Needs Replacement. I Was Hoping You Could Give Me A Diagram And Instructions On How...

What Are The Torque Settings For A Honda Ballade Luxline 150 16 Valve Main And Big End Bearings. The One With The Carburetor

The Connecting Rod Bearings Are Due For Replacement

I Have A 1989 Ford Bronco (full Size) With The 302 V-8. I Had The Engine Replaced 3 Years Ago, And Hardly Ever Drive It. Apprx 15,000...

I'm Replacing My Connecting Rod Bearings And On One Rod There Is Still Up And Down Play, All Of The Other Rods Are Fine. What Could...

I Had A Bad Rod Bearing On #6 Connector, So I Replaced Them All. The Next Day It Happened Again, Same Rod. What's Causing It?