REPLACE/REMOVE CAMSHAFT SENSOR Questions
2001 Jeep Wrangler No Fire To Plugs
2001 Jeep Wrangler 6 Cyl Four Wheel Drive Automatic
I Have Changed The Plugs, The Coil Rail And The Cam Sensor And I Am Still Not...
Asked by rearley2009
1996 Jeep Cherokee Camshaft Position Senor A Circuit...
I Have A 96 Cherokee 4.0 . It Starts And Then Stalls As I Am Driveing , I Used My Scan Tool Obd2 And Got Code P0340 Camshaft Position...
Asked by 96cherokee
FORD RANGER Common Rail Diesel Injection.
Ford Ranger 2007 Wl-c Diesel Engine. No Start. Code P0335 Crankshaft Sensor Circuit A. Pin Out Circuit To Ecm Check Good,change Camshaft...
Asked by Dumplings
Car Will Stall Just As It Fully Warms Up; That Is When...
Car Will Stall Just As It Fully Warms Up; That Is When The Temp Guage Just Arrives At The Normal Position. Start Fine, Runs Fine Afterwards...
Asked by Anonymous
2002 Hyundai Elantra
No Signal From Camshaft Sensore,sensor Replaced,camshaft Sensor Checks Ok,wireing From Camshaft Sensor,shows No Shorts Or Open Circuits.code...
Asked by oglethorpe
1994 Pontiac Transport
Here The Deal... 1994 Transport 3800 V6 140k Miles. Check Engine Light Stays On, Had It Checked By Dealer And 3 Other Mechanics. Seems...
Asked by mobbeh
When Driving, Pressing On Gas To Accelerate Car Acts...
When Driving, Pressing On Gas To Accelerate Car Acts Like It Has No Power. If I Press Pedal Hard Almost Or To The Floor It Will Go But With...
Asked by Anonymous
1996 Dodge Intrepid Help
Engine Performance Problem
1996 Dodge Intrepid 6 Cyl Front Wheel Drive Automatic
It Wont Fire...ive Changed The Coil And The Cam...
Asked by demon673
97 Neon
Engine Stalls Out And Dies Sometimes .it Dose It At Any Speed At Random. It Tourqes So Hard It Keep On Tearing The...
Asked by jrcmps1
2003 Ford Taurus Cam Sensor
Since Replacing Cam Sensor And Synchronizer Assy. The Car Will Occasionally Die.
Asked by lsage
