SPONSORED LINKS

Will not start

Tiny
VIRGIE BRUNER
  • MEMBER
  • 1989 JEEP LIBERTY
  • 4.0L
  • 6 CYL
  • 2WD
  • 180,000 MILES
Vehicle was running good, bottom radiator hose blew, replaced hose and refilled radiator, had problem getting vehicle to start. Vehicle was running good blew another hose going to heater, replaced that hose and now vehicle will crank but will not start. Any help would be appreciated. Have replaced starter, alternator and coil, did not help.
SPONSORED LINKS
Saturday, March 17th, 2018 AT 7:46 PM

4 Replies

Tiny
PATENTED_REPAIR_PRO
  • MECHANIC
  • 1,853 POSTS
If this has a distributor, it sounds to me as though it got wet when the hose blew. Remove the cap and dry out the inside, put it back on and try again.
Was this
answer
helpful?
Yes
No
Sunday, March 18th, 2018 AT 5:41 AM
Tiny
VIRGIE BRUNER
  • MEMBER
  • 3 POSTS
Vehicle is fuel injected, no distributor.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, March 18th, 2018 AT 10:08 AM
Tiny
VIRGIE BRUNER
  • MEMBER
  • 3 POSTS
Error on my part, vehicle does have a distributor. Will check it out.
Was this
answer
helpful?
Yes
No
Sunday, March 18th, 2018 AT 1:13 PM
Tiny
PATENTED_REPAIR_PRO
  • MECHANIC
  • 1,853 POSTS
It may have even dried out on its own by now.
Was this
answer
helpful?
Yes
No
Sunday, March 18th, 2018 AT 2:59 PM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links