Advertisement

1993 Mazda 626 Fuel Stops at Regulator

Avatar
2FRESH
  • MEMBER
  • 1 POST
1993,Mazda,626,4cyl,auto. Fuel is getting to the fuel pump regulator but no further regulator is pulling a vacuum. The fuel pump is on no fuel going pass the fuel pump regulator i change regulators and it still doing the same thing.Will run when for a second when adding choke cleaner in the breather.Fuel is not going pass the regulator the car was operating properly before this happen.
Aug 19, 2007 at 1:28 PM
Advertisement
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
It has to get thru the injector/s to fire up. Listen to the injectors are they clicking-if not check for power on the injectors connector-preferably using a noid lite-Do you have power? or the noid lite flashing.


https://images.2carpros.com/forum/automotive_pictures/12900_donate_2.gif

Aug 19, 2007 at 1:36 PM
Advertisement

Suggested Repair

Confirm fuel is reaching the injectors. Listen for injector click; if none, check injector connector power with a noid light and see whether it flashes.

Conversation Summary

The owner of a 1993 Mazda 626 says fuel reaches the fuel pressure regulator but does not pass it, even after the regulator was replaced. The engine runs only briefly when choke cleaner is sprayed into the breather. The expert says fuel must pass through the injectors and advises listening for injector click and checking injector power with a noid light.

Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle