Low oil Pressure after timing chain guide replace

Tiny
SURFSCHNAUZIE
  • MEMBER
  • 14 POSTS
Is the intake gasket the one that is under the intake manifold and fairly easy to get to? If so, I didn't change that when I reinstalled. I left the existing one. Additionally, I was not able to tighten one stud of the bolts because it broke.
Was this
answer
helpful?
Yes
No
Sunday, May 14th, 2017 AT 10:27 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Tha may be it if there is a water passage in intake manifold a broken bolt that will not torque would let water pas/vacuum leak etc. Probably bolt getting fixed may cure your problem but if you take the intake off replace the gasket
Was this
answer
helpful?
Yes
No
Sunday, May 14th, 2017 AT 12:44 PM
Tiny
SURFSCHNAUZIE
  • MEMBER
  • 14 POSTS
Could a leak referenced above in the intake manifold cause my extreme low pressure at warm?
Was this
answer
helpful?
Yes
No
Monday, May 15th, 2017 AT 4:22 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
No
Was this
answer
helpful?
Yes
No
+1
Monday, May 15th, 2017 AT 6:05 AM

Please login or register to post a reply.

Sponsored links