a/c compressor bearings

GMC SONOMA
Avatar
SHADES
  • MEMBER
  • 1 POST
My a/c compressor bearing burned out and, naturally, the clutch assembly is pretty fragged. I haven't noticed any leaking from the vehicle but I did inspect underneath the a/c system and found residue of leakage. The pulley will not turn at all with the engine turned off and makes a grinding sound when I start the engine. Do I need to replace my entire a/c system or is there a more cost effective way to get this fixed?
Oct 3, 2007 at 11:34 AM
Advertisement
Avatar
BOOTDOG
  • ✓ASE Certified Mechanic
  • 665 POSTS
  • ASE Certified Mechanic
by the description, your compressor is toast. you'll need to replace it, the orfice tube and dryer in order for the parts store to warranty the compressor. replace the o-rings too and try flushing out the condenser and lines to remove any metal fragments from the system. blow compressed air through the lines and condenser to dry them out.
Oct 3, 2007 at 5:32 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.