SPONSORED LINKS

Ford kit car.

Tiny
OUSNAKE
  • MEMBER
  • FORD WINDSTAR
Question for a friend. He has a mercedes kit car. With a 1977 pinto engine. 2 Liter, and a 2barrel carburetor. (Motorcraft Model?) Recently it was rebuilt. We installed carburetor and started car. The car started fine. But realized the fuel was aged and needed to be drained. We added fuel booster, to help old gas. But then when we went to start the car again. The carburetor began flooding. Overflowing out of the reserve. And the car would not start. I have been told it could be the float or the needle. But again. Could I have a bad rebuild? Or could it be something else?
SPONSORED LINKS
Monday, April 30th, 2007 AT 5:22 PM

3 Replies

Tiny
MATHIASO
  • MECHANIC
  • 1,209 POSTS
Check the fuel line, charcoal canister and canister purge line.
I suppose the car is running good.
Was this
answer
helpful?
Yes
No
Wednesday, February 7th, 2007 AT 9:36 AM
Tiny
FLEMINGC
  • MEMBER
  • 2 POSTS
Thanks. Yes, car runs great
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, February 7th, 2007 AT 9:42 AM
Tiny
BRUCE HUNT
  • MECHANIC
  • 3,754 POSTS
Time to get down and dirty. Open the hood when the smell is present and follow the fuel system lines. This could be an injector leak. Be careful as atomized fuel is very combustible.
Was this
answer
helpful?
Yes
No
Wednesday, February 7th, 2007 AT 9:49 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links