1997 Ford Mustang lifters tapping

Tiny
PSANTOS
  • MEMBER
  • 1997 FORD MUSTANG
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 99,000 MILES
I flushed the motor twice, changed the intake gasket and still there is not enough oil pressure to the top of the motor, I took the oil pressure sending unit off and pressure checked and the bottom of the motor is 90 psi, what could this be?
Tuesday, December 2nd, 2008 AT 7:25 AM

3 Replies

Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Is there lifter noise? What is the reason you think oil P low? The oil get's there via lifter through push rod and onto rocker. Is no oil getting to rockers?
Was this
answer
helpful?
Yes
No
Tuesday, December 2nd, 2008 AT 2:51 PM
Tiny
PSANTOS
  • MEMBER
  • 2 POSTS
Yes ther is lifter noise from all the lifters, the psi from the lower part of the motor is 90 psi, also the rods seem to be fine, all the noise is from the lifters and it seem like the oil is barely seeping from the lifters and I never seen all lifters rattling at once.
Was this
answer
helpful?
Yes
No
Wednesday, December 3rd, 2008 AT 6:46 AM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
It maybe loosing preassure at the camshaft bearings. If really worn oil will drop back in block instead of oil galley for lifters. One or two lifters noisy because of gunked up I could see but not all and both oil gallies pluged not likely.
Was this
answer
helpful?
Yes
No
Wednesday, December 3rd, 2008 AT 8:13 AM

Please login or register to post a reply.

Sponsored links