SPONSORED LINKS

1998 Explorer Blower

Tiny
RSALEXANDER
  • MEMBER
  • 1998 FORD EXPLORER
I have a 1998 Ford Explorer Eddie Bower 5.0liter with 155000 miles. When I cut the air or heat on it comes out of the rear units but nothing on the front dash. The defrost will not come on also. I jumped the blower and it worked fine. What could it be?
SPONSORED LINKS
Monday, May 14th, 2007 AT 9:44 AM

1 Reply

Tiny
UNCLE FESTER
  • MEMBER
  • 13 POSTS
Sounds like the Blower Resistor:
Disconnect the negative battery cable.

Disconnect the wire connector from the resistor assembly.

Remove the 2 screws attaching the resistor assembly to the blower or evaporator case and remove the resistor.

Installation is the reverse of the removal procedure. Check the blower motor for proper operation in all blower speeds.


https://www.2carpros.com/forum/automotive_pictures/73973_2000MercBlowerMotorRes_1.jpg

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, May 14th, 2007 AT 11:25 AM

Please login or register to post a reply.

Related Blower Fan Content

Blower Motor Replacement
VIDEO
Blower Motor Replacement
Instructional repair video
Blower Fan Motor Works on High Only
GUIDE
Blower Fan Motor Works on High Only
Does your blower fan work on the high speed setting only? This problem is a classic blower motor resistor problem which is common on vehicles that use manual fan speed ...
VIEW MORE

Sponsored links