1995 Ford Explorer heat selection switch does not function

Tiny
SONNYSEIBERT
  • MEMBER
  • 1995 FORD EXPLORER
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 209,000 MILES
Heat/ ac has defaulted to defrost and turn selection switch does not change anything. Checked vacuum/air lines on switch, all connected. Can the main line be plugged from the engine?
any other suggestions?

Mike
Saturday, November 14th, 2009 AT 1:12 PM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Mike:
It sounds like a vacuum related problem. Chances are there is a leak under the dash, or the supply line from the engine has gone bad. With the engine running, you may actually hear a hissing sound from the leak. Check it out and let me know what you find. Also, if everything is good, the actuator itself could be bad, but that isn't usually the case.
Was this
answer
helpful?
Yes
No
Tuesday, November 17th, 2009 AT 4:48 PM

Please login or register to post a reply.

Sponsored links