Computer control relay location

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
You are welcome.

Roy
Was this
answer
helpful?
Yes
No
Sunday, July 7th, 2019 AT 1:51 PM
Tiny
TCOVALLE
  • MEMBER
  • 32 POSTS
Error codes cylinders 4, 5 and 6 misfires. Replaced sparkplugs ignition coils and fuel injectors. Error codes disappeared and car ran perfect. 30 minutes later ssne cylinder misfires pop up. However, thing is when I clear codes with diagnostic tool, car runs smooth and perfect. Yet 30 minutes later check engine light comes back on and car misfires. Believe problem is with actual ECM instead of actual cylinder misfires. What could be causing this?
Was this
answer
helpful?
Yes
No
Thursday, December 10th, 2020 AT 7:04 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
What were the codes that set?

Roy
Was this
answer
helpful?
Yes
No
Thursday, December 10th, 2020 AT 7:12 AM
Tiny
TCOVALLE
  • MEMBER
  • 32 POSTS
P0304, P0305 and P0306.
Was this
answer
helpful?
Yes
No
Thursday, December 10th, 2020 AT 9:03 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
What are the results of the compression test I requested?

Roy
Was this
answer
helpful?
Yes
No
Thursday, December 10th, 2020 AT 9:23 AM
Tiny
TCOVALLE
  • MEMBER
  • 32 POSTS
Compression is good. All sparkplugs ignition coils and fuel injectors are new.
Was this
answer
helpful?
Yes
No
Thursday, December 10th, 2020 AT 9:32 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Okay, what was the compression? Please give me the numbers.

Roy
Was this
answer
helpful?
Yes
No
Thursday, December 10th, 2020 AT 9:34 AM
Tiny
TCOVALLE
  • MEMBER
  • 32 POSTS
That's been a while. I honestly couldn't give you an exact number. But all were over 100 PSI. Very little differentials.
Was this
answer
helpful?
Yes
No
Thursday, December 10th, 2020 AT 10:27 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
I would retest and get the exact numbers. It makes a difference. You should have 140-160 pounds. If you do not, that could be the issue.

https://www.2carpros.com/articles/symptoms-of-low-compression

Roy
Was this
answer
helpful?
Yes
No
Thursday, December 10th, 2020 AT 10:29 AM
Tiny
TCOVALLE
  • MEMBER
  • 32 POSTS
Will do. Thank you. So you don't think it could be an ECM problem?
Was this
answer
helpful?
Yes
No
Thursday, December 10th, 2020 AT 10:37 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Not at this point.

Roy
Was this
answer
helpful?
Yes
No
Thursday, December 10th, 2020 AT 10:41 AM

Please login or register to post a reply.

Sponsored links