1996 Dodge Neon Will Not Fire

Avatar
FROGGY
  • MEMBER
  • 2 POSTS
did engine swap on a 1996 dodge neon.none of the sensors were the same.changed all of the sensors, except the cam sensor.[s.o.c],just changed wire plug on it.fresh coil pack,new plugs and wires.it still will not fire.what could be the problem?
Jan 29, 2006 at 2:37 AM
Advertisement
Avatar
2CARPRO JACK
  • ✓Experienced Mechanic
  • 11,533 POSTS
find the difference in the cam sensor
Jan 31, 2006 at 8:53 AM
Avatar
FROGGY
  • MEMBER
  • 2 POSTS
thanks for the fast reply.i found that it was the timing belt broke.in the haste of getting the engine back in i forgot to change the timing belt.thanks again, froggy.
Feb 9, 2006 at 1:03 AM

Suggested Repair

Replace the broken timing belt that was not changed when the engine was reinstalled. The no-start was caused by the broken timing belt.

Conversation Summary

After an engine swap on a 1996 Dodge Neon, the engine would not fire despite replacement of mismatched sensors, the cam sensor connector, coil pack, plugs, and wires. An expert suggested checking the cam sensor difference. The owner later found the timing belt had broken and had been forgotten during reinstallation.

Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle