SPONSORED LINKS

1995 Chevy S-10 will not fire properly

Tiny
LAURIE MAXEY
  • MEMBER
  • 1995 CHEVROLET S-10
  • 4 CYL
  • 2WD
  • MANUAL
  • 214,000 MILES
My truck started missing and after checking we found it to be firing weak. We had already put new plugs and plug wires on it so we changed the coils and control modulator plate and afterwards it still had a miss. It will start and run for a few minutes and then quit. After that it has to sit for a few minutes befor it will start again. The smell of gas is strong when it starts also. We have already changed the crank sensor. Can you tell me whats wrong, PLEASE!
SPONSORED LINKS
Thursday, July 1st, 2010 AT 10:04 PM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
You may have a fuel injection problem. A bd injector will cause a miss as well. Or it can be fuel pressure, or fuel filter. Or eve n bad comnpression. It can also be an ignition problem. That isn't much ehlp but if you have a tach disconnect it and see if it starts. If it does then the tach is causing theproblem.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, July 2nd, 2010 AT 2:54 PM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links