1993 Buick Regal code 22

Tiny
BPACE12
  • MEMBER
  • 1993 BUICK REGAL
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 140,000 MILES
I am getting a code 22 after I replaced the tps. I have check the connection and it does not have the locking pieces on it but other than that the wiring looks good. What can I do to repair this problem.

Yes the locking tabs are missing. It died on me today but start right up.
Friday, January 4th, 2008 AT 3:05 PM

5 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
It does not have the locking pieces on it

Are you talking about the locking tabs on the wiring connector if so just use superglue around it-this will also seal it.
Was this
answer
helpful?
Yes
No
Friday, January 4th, 2008 AT 3:15 PM
Tiny
BPACE12
  • MEMBER
  • 4 POSTS
Yes the locking tabs are missing.
Was this
answer
helpful?
Yes
No
Friday, January 4th, 2008 AT 9:08 PM
Tiny
BPACE12
  • MEMBER
  • 4 POSTS
Will that fix the code 22 I'm getting
Was this
answer
helpful?
Yes
No
Saturday, January 5th, 2008 AT 11:53 AM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
If its connected and tightly secured on it. If not there's still problem You might want to clear the code and see what happens.
Was this
answer
helpful?
Yes
No
Saturday, January 5th, 2008 AT 12:13 PM
Tiny
BPACE12
  • MEMBER
  • 4 POSTS
Ok Thank you, I'll give it a try.
Was this
answer
helpful?
Yes
No
Saturday, January 5th, 2008 AT 12:17 PM

Please login or register to post a reply.

Sponsored links