Buick Lesabre control arm bushings

BUICK LESABRE
Avatar
MELLOWMOI
  • MEMBER
  • 1 POST
I have a 1994 Buick Lesabre. I need to know what tools I'll need to replace the upper and lower control arms bushings on both sides. It looks like a fairly simple job, but I'm not sure if I need to dissamble anything to put the new ones on. Any help would be greatly appreciated!

94 Lesabre, 120k, 3.8l
Oct 12, 2007 at 2:56 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
MERLIN2021
  • CAR REPAIR CONTRIBUTOR
  • 17,250 POSTS
94 Lesabre is front wheel drive there are no upper control arms... as for the lowers, easier to buy a new control arm complete! Un bolt the old one seperate the ball joint, and install the new one...If you want to go the hard way, you'll need a ball joint press with bushing attachments.
Oct 12, 2007 at 3:10 PM
Advertisement