Good morning.
It sounds like the transfer case is worn internally. There is a syncro inside for changing ranges and when it wears out it will pop out into neutral.
Roy
Check the adjustment as well.
Roy
1. Place shift lever in the 4 HI position.
2. Raise and support vehicle, then disconnect linkage rod from console shift lever.
3. Shift transfer case into 4 HI position. Lever should be in full forward detent, Fig. 1.
4. Adjust swivel to align with hole in console shift lever.
5. Install linkage rod into shift lever.
Images (Click to make bigger)
SPONSORED LINKS
Monday, July 2nd, 2018 AT 6:38 AM