2013 Toyota Yaris toyota yaris starts, dont idle

2013 TOYOTA YARIS
1.0L • 3 CYL • FWD • MANUAL
Avatar
GTRONICS
  • MEMBER
  • 7 POSTS
When i start up the car, it starts perfect, but after about 30seconds, it just die.
After dying, when i start it again it still starts perfect but does the same. Even when i keep it on a rev it still dies after about 30seconds. Ive tried another computer box but does the same.
Is it possible it could be the coilpack? Or what other options do i have?
Mar 22, 2015 at 6:37 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
try resetting security system if no manual look online. if it continues scan for codes an check fuel pressure
Mar 22, 2015 at 6:58 AM
Advertisement
Avatar
GTRONICS
  • MEMBER
  • 7 POSTS
Thank you for the fast response. So theres no way it could be coilpack?
Mar 22, 2015 at 8:40 AM
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
reread my first reply
Mar 22, 2015 at 12:00 PM
Avatar
GTRONICS
  • MEMBER
  • 7 POSTS
Ok im not exactly an expert.
How do i "scan" for codes?
And i cant find a 2013 model manual anywhere online
Do u perhaps have a link for me please?
Mar 22, 2015 at 10:07 PM
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
you have to take it to a garage to get codes scanned you don't look for the manual you look for resetting security system for your car
Mar 23, 2015 at 7:41 AM
Avatar
GTRONICS
  • MEMBER
  • 7 POSTS
I found out now from the previous owner that the ecu was dead and the car wouldnt start at all, so they changed the ecu(2nd hand)
I bought the car as is, in the state its in now.
So now im wondering: could this ecu be faulty or perhaps the wrong ecu?
Mar 24, 2015 at 6:29 AM
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
have a pro scan and install the ecu properly. they are vin specific. he will have to down load stuff for your car
Mar 24, 2015 at 7:18 AM
Avatar
GTRONICS
  • MEMBER
  • 7 POSTS
They tried scanning the ecu. No luck.
I have the two ecu's in front of me now.
The original one thats dead has a barcode number:
89661-0DF20 and another code 1KR-FE with a B underneath that code.
The other ecu wich starts but dont idle is:
89661-0DB80 and another code 1KR-FE with an S underneath that code.
Is the 2nd ecu the right replacement?
Mar 24, 2015 at 8:45 AM
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
I dont' have that type of info. a pro should program one of them to your car.quit guessing like you have been
Mar 24, 2015 at 9:22 AM