Will not shift

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Hi wittmann1940,

Get a scan done to retrieve for truoble codes and let me know if any found.

Does the OD OFF light comes on and goes off when the OD switch is operated?
Was this
answer
helpful?
Yes
No
Wednesday, October 30th, 2019 AT 5:50 PM (Merged)
Tiny
JOE BALESTRIERI
  • MEMBER
  • 1 POST
  • 2000 HYUNDAI ACCENT
Brakes problem
2000 Hyundai Accent 4 cyl Two Wheel Drive Automatic 70.00 miles

I took my car in for inspection an when I went
to pick it up. I started it up I cant get into gear when I put on the brake. What cause to this to happen it was fine when I droped it off
Was this
answer
helpful?
Yes
No
Wednesday, October 30th, 2019 AT 5:50 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Hi joe balestrieri,

The interlock system could be not working due to a faulty brake switch or blown fuse. Check for brake light operations.
Was this
answer
helpful?
Yes
No
Wednesday, October 30th, 2019 AT 5:50 PM (Merged)
Tiny
WACKYRICH88
  • MEMBER
  • 1 POST
  • 2001 HYUNDAI ACCENT
  • 6 CYL
  • AWD
  • AUTOMATIC
  • 199,000 MILES
Hello I have a 2001 hyundai santa fe I was driving in the rain last week and it started to hitch and buck after 3500 rpm then it made a clunk on the highway shifted down into 3rd and wouldent shift anymoore then I pulled over shut it off and stated it again it worked perfect shift wise

but the car is still hitching and bucking I changed th plugs and wires and 2 speed sensors in the rear trailing arms but after 3500 rpm its still hitching and bucking

i ran a diagnostic and got these codes
P1529 and P0715
how do I fix this?
Was this
answer
helpful?
Yes
No
Wednesday, October 30th, 2019 AT 5:50 PM (Merged)
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
Theres a speed sensor on trans called turbine speed sensor. Thats the 1 you need to check wiring/replace. Common problem.
Was this
answer
helpful?
Yes
No
Wednesday, October 30th, 2019 AT 5:50 PM (Merged)
Tiny
FIXITMR
  • MECHANIC
  • 9,990 POSTS
You also may need TCM reflashed.
Was this
answer
helpful?
Yes
No
Wednesday, October 30th, 2019 AT 5:50 PM (Merged)
Tiny
ROBBS123321
  • MEMBER
  • 2 POSTS
I have the same exact problem in my 2003 elantra same exact codes cars acting the same way. I just changed the speed sensors I think I broke the clips but hey all seem seated well? Should I change the clips or what elsoe might be causing this? Changed aqll three speed sensors.
Was this
answer
helpful?
Yes
No
Wednesday, October 30th, 2019 AT 5:50 PM (Merged)

Please login or register to post a reply.

Sponsored links