Fuel pump installation

Tiny
JANJAN198128
  • MEMBER
  • 2003 MAZDA 6
  • 4 CYL
  • AUTOMATIC
How do install a fuel pump?
Sunday, June 5th, 2011 AT 8:15 PM

8 Replies

Tiny
DNAGARAGE
  • MEMBER
  • 13 POSTS
Relieve the fuel system pressure and disconnect the negative battery cable with a socket wrench.
Access the fuel pump by taking out the rear seat and removing the service hole cover. Unplug the fuel pump's electrical connector and disconnect the hoses from the fuel tank.
Remove the fuel pump using tool while ensuring there is no gap between the tool and the fuel pump cap. You will now be able to remove the fuel pump and gaskets from the fuel tank.
Install the new fuel pump using the items included in the kit, especially the gasket. Align the start positions of the fuel pump cap and retainer and tighten the cap one full turn by hand. Do not use any silicon or glue that will be destroyed from the petrol because you will have problem.
Was this
answer
helpful?
Yes
No
+5
Sunday, June 5th, 2011 AT 11:03 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,643 POSTS
Hello,

You are lucky becasue your car has an access port so you don't need to remove the tank to get the fuel pump out.

Here is a guide that has the tank out but shows you how to get the pump out,

https://www.2carpros.com/articles/how-to-replace-an-electric-fuel-pump

Here is a video that shows how to remove those fuel lines. It shows for a ford but the connectors are all the same.

https://youtu.be/Boi0DPXVHbM

Here is what it will be like on your car

Check out the diagrams (Below)

Please let us know what happens.

Cheers, Ken
Was this
answer
helpful?
Yes
No
+1
Friday, December 1st, 2017 AT 6:55 PM
Tiny
ANETT
  • MEMBER
  • 1 POST
  • 2003 MAZDA 6
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 65,000 MILES
Engine Performance problem
2003 Mazda 6 6 cyl Front Wheel Drive Automatic 65000 miles

how do I replace the fuel pump on a 2003 mazda6?
Was this
answer
helpful?
Yes
No
+3
Friday, December 1st, 2017 AT 6:55 PM (Merged)
Tiny
OBXAUTOMEDIC
  • MECHANIC
  • 3,711 POSTS
Hello,

First you will need to releave fuel pressure......

next remove the rear seat cushion to gain access to fuel pump access panel.....

Removing Fuel Pump.....


https://www.2carpros.com/forum/automotive_pictures/188069_03mazda6fuelpump_1.jpg

Was this
answer
helpful?
Yes
No
+4
Friday, December 1st, 2017 AT 6:55 PM (Merged)
Tiny
MTARDIFF
  • MEMBER
  • 1 POST
  • 2006 MAZDA 6
  • 4 CYL
  • AUTOMATIC
  • 185,000 MILES
How do you replace a fuel pump in a 2006 mazda 6
Was this
answer
helpful?
Yes
No
Friday, December 1st, 2017 AT 6:55 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Remove fuel cap and fuel pump relay, start car til it stalls. Remove rear seat cushion see pics for other details.
Was this
answer
helpful?
Yes
No
-1
Friday, December 1st, 2017 AT 6:55 PM (Merged)
Tiny
JOHNIXON
  • MEMBER
  • 1 POST
  • 2007 MAZDA 6
  • 60,000 MILES
Petrol fuel pump does not prime unless hit with mallet in recent sub zero temperatures. Is this due to frozen water in fuel or simply wear in the electric fuel pump. Should I replace fuel pump?
Was this
answer
helpful?
Yes
No
+1
Friday, December 1st, 2017 AT 6:55 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Replace pump yes if that much ewater in fuel then drain tank while pump is out
Was this
answer
helpful?
Yes
No
Friday, December 1st, 2017 AT 6:55 PM (Merged)

Please login or register to post a reply.

Sponsored links