Will not start, codes P0700 and P0562

2002 DODGE INTREPID
115,194 MILES • 3.5L • 6 CYL • 2WD • AUTOMATIC
Avatar
TIFFY1970
  • MEMBER
  • 1 POST
I just replaced the battery with a brand new one. I replaced all the spark plugs, and it turns over, but it won't start. I just keep like a winding noise I don't know what else to do to get it going. I just hooked up the code reader and it said P0 700 transmission, as well as P0562 system voltage low. What do those two things mean? Do I need to replace them? Do I need to pull them out and fix them?
Mar 29, 2022 at 2:52 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,240 POSTS
Hi,

The P0700 is a generic code retrieved from the powertrain module which indicates there is a diagnostic trouble code stored in the transmission control module. The P0562 indicates just what you said, a low voltage issue.

So, although the battery is new, make sure it is fully charged first. However, before doing that, I need to hear it cranking. You indicated a winding noise. I need to hear it. If possible, record it and upload it for me to hear.

Let me know, and I will watch for your reply.

Take care,

Joe
Mar 29, 2022 at 12:54 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.