SPONSORED LINKS

Will not start

Tiny
LOUIE181
  • MEMBER
  • 2002 DODGE INTREPID
  • 3.5L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 158,000 MILES
My car is the R/T model. It has a no start problem, new battery and started right up, after ten minutes of idle, key off, sat there while I place the parts back on the car. After half an hour I attempted to start the vehicle and got a clicking nose and would not start. I did have a PO0700 code come up on the scanner. I have a reading of 14.7 off the alternator, and the car starts with a jumper cables.
SPONSORED LINKS
Saturday, October 14th, 2017 AT 9:50 AM

1 Reply

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
The P0700 is a generic code for a transmission issue. You would need to get the codes read in the TCM for that issue but that is not our starting problem.

If it starts with a jump, you definitely have a battery voltage problem, probably a bad connection at the battery. Remove all the cables and clean them with a wire brush.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, October 14th, 2017 AT 11:23 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links