SPONSORED LINKS

Steering issues

Tiny
CUDANOTCH67
  • MEMBER
  • 2002 CHEVROLET SUBURBAN
  • V8
  • 4WD
  • AUTOMATIC
Can centerlink be put in upside down
if so what would the outcome be? When I back out of a parking spot the outside tire drags. No matter which direction I turn while backing. The problem started after the Idler Arm, Pitman Arm, all 4 Tie Rods were changed. So the centerlink was out of the truck. I've had the alignment checked and it's good. Drives fine except in sharp turns.
SPONSORED LINKS
Saturday, November 13th, 2010 AT 6:41 PM

2 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
No, that's not really possible. It will only fit one way. You could have the wrong one though and you could also need wheel alignment after changing those parts.
Was this
answer
helpful?
Yes
No
Saturday, November 13th, 2010 AT 6:48 PM
Tiny
CUDANOTCH67
  • MEMBER
  • 2 POSTS
It's not the wrong link. It original to the truck. Alignment has been done and redone. It's not that. It looks like the centerlink could be put in upside down but would rub. The pitman arm and idler arm can't be in upside down. So I don't know what else it could be causing the problem.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, November 13th, 2010 AT 9:35 PM

Please login or register to post a reply.

Related Pitman Arm Content

VIEW MORE

Sponsored links