SPONSORED LINKS

2001 Mazda Millenia engine in my car

Tiny
KP332
  • MEMBER
  • 2001 MAZDA MILLENIA
  • 6 CYL
  • TURBO
  • 2WD
  • AUTOMATIC
I bought a 01 or 00 mazda millennia super charged car from a guy n he thought that one of the rods were broke or cracked. So I pulled the oil pan off and when I did there was a lot of gas in the oil. So then I got to looking and there was no broken rod or cracked rod. But the rod bearing caps were a little wore out, so I replaced the rod bearing caps from bottom of oil pan, I put it all back together and tried to start it, and it fires like it wants to start, but it just wont stay running. Then I checked the oil and there was gas in the oil again, and I could see a little oil dripping from the exhaust under the car. What could be causing this? And how do I fix it? Any ideas?
SPONSORED LINKS
Tuesday, March 25th, 2014 AT 7:43 PM

1 Reply

Tiny
KNOWLEDGE IS POWER
  • MECHANIC
  • 1,136 POSTS
The fuel in the oil has most likely washed out and destroyed the cylinders causing no or low compression. Take out the spark plugs and rent the compression tester from the local parts store. It just screws in the plug holes. You should have at least 75 psi and not more than 15 psi between cylinders
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, March 26th, 2014 AT 8:03 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links