2001 Hyundai Trajet Solenoid drive stay on

2001 HYUNDAI TRAJET
200,000 MILES • 2.0L • 4 CYL • 2WD • AUTOMATIC
Avatar
YASEEN SOOBADAR
  • MEMBER
  • 3 POSTS
I have diagnosed the car and the Solenoid D stays on that's why the vehicle does not start. I would like to know what is the problem? (Garage Yaseen from Mauritius)

Thank You.
Feb 5, 2014 at 3:28 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
it's probably not allowing power to go through neutral safety switch as the solenoid is staying on and not letting it go through. the solenoid stayin g on will have to be fixed first.
Feb 5, 2014 at 10:26 PM
Avatar
YASEEN SOOBADAR
  • MEMBER
  • 3 POSTS
Hi,

Thank you for the prompt response.

Can you please advise how to fix the "solenoid staying on"?

Thank You.
Feb 5, 2014 at 10:59 PM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
you will have to scan for codes then see why power is still being applied to that circuit. could be a lot of things causing it.
Feb 5, 2014 at 11:01 PM
Avatar
YASEEN SOOBADAR
  • MEMBER
  • 3 POSTS
P0756shiftsolenoidD is the code.

Is that of any help?
Feb 5, 2014 at 11:06 PM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
you really need a pro to diagnose this we dont' have trajet in U.s . so I did a santefe which is close also it must be 755 code not a756 but here are causes and fixes. I would really suggest a transmission guy looking into this as it is may be something else. I have no further suggestions.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Feb 5, 2014 at 11:13 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.