What brand and part number was the part you installed?
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 9:37 PM
WHEELCHAIRDUDE49
MEMBER
73 POSTS
Motorcraft dy-1144 I do believe this one they sent me was for a 3.0 instead of a 2.5 because the original was shaped like a cone and the new one was shaped like the firing end of a 22 bullet
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 9:50 PM
WHEELCHAIRDUDE49
MEMBER
73 POSTS
First pic is is the oem
second is the replacement they sent me.
Image (Click to make bigger)
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 10:17 PM
SATURNTECH9
MECHANIC
30,869 POSTS
Does your old coolant temp sensor look like the one I posted a pic of?
Image (Click to make bigger)
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 10:18 PM
WHEELCHAIRDUDE49
MEMBER
73 POSTS
Correction 1st is the replacement
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 10:19 PM
WHEELCHAIRDUDE49
MEMBER
73 POSTS
No that looks like the one for the gauge. This looks like the oem
Image (Click to make bigger)
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 10:25 PM
WHEELCHAIRDUDE49
MEMBER
73 POSTS
I will send both pics side by side. 1st is the oem
second is the the replacement they sent me.
Images (Click to make bigger)
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 10:34 PM
SATURNTECH9
MECHANIC
30,869 POSTS
The pic you just posted is for the dy1144 so maybe the one you got was miss boxed if its different.
Was this
answer
helpful?
Yes
No
Monday, July 15th, 2013 AT 10:34 PM
WHEELCHAIRDUDE49
MEMBER
73 POSTS
Well I changed the ect sensor and still have an issue with stalling. Doesn't happen all the time, just once in a while. Sometimes at stop lights somtimes at idle when it's in park.
Was this
answer
helpful?
Yes
No
Sunday, July 21st, 2013 AT 2:42 PM
SATURNTECH9
MECHANIC
30,869 POSTS
Sounds like its running better if the power loss I gone. Have you checked the throttle body for being all carboned up and also inspected idle air control valve being carbone up/sticking/failing.
Was this
answer
helpful?
Yes
No
Sunday, July 21st, 2013 AT 3:08 PM
WHEELCHAIRDUDE49
MEMBER
73 POSTS
Not Yet but I will this week. With the iac valve being 7 months old and the truck running poorly for a few weeks, would it be possible for it to carbon up that quickly?
Was this
answer
helpful?
Yes
No
Sunday, July 21st, 2013 AT 3:30 PM
WHEELCHAIRDUDE49
MEMBER
73 POSTS
It doesn't seem to idle up when the air conditioning turns on.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, July 21st, 2013 AT 3:31 PM
SATURNTECH9
MECHANIC
30,869 POSTS
I would check it for carbon and the wiring going to it.
Was this
answer
helpful?
Yes
No
Sunday, July 21st, 2013 AT 3:58 PM
WHEELCHAIRDUDE49
MEMBER
73 POSTS
Ok finally put a new iac valve on it and ect sensor. Runs well and doesn't stall at lights or stop signs. Drove it 3 miles and shut it off for 10 minutes to run and errand and started it back up and ran fine for 15 seconds before stalling again.
Started easy and ran fine. What's causing the stall in park after it cools down for
a bit?
Thanks
Was this
answer
helpful?
Yes
No
Tuesday, July 30th, 2013 AT 4:12 PM
SATURNTECH9
MECHANIC
30,869 POSTS
So it runs fine when its warm but stallls when the engine is cold?Do you have any codes still?
Was this
answer
helpful?
Yes
No
Thursday, August 1st, 2013 AT 6:45 PM
WHEELCHAIRDUDE49
MEMBER
73 POSTS
Yes it still does. I was told to
remove B- cable to erase old idle memory. Now it's back to no power when I
give it gas till it warms up.