SPONSORED LINKS

1999 Ford Explorer troubleshooting

Tiny
JUSTINSUE
  • MEMBER
  • 1999 FORD EXPLORER
  • 4.0L
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 122,000 MILES
It was running fine went to start it and it would not idle have too keep my foot on the brake and the accelerator to get it n gear or move let foot off of accelerator and it dies what could be the problem
Sunday, November 16th, 2014 AT 2:32 AM

2 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
First eliminate all vacuum or air leaks in the system. You may have a bad IAC ( idle air control) but try cleaning the throttle body first. Remove the intake snorkel, have someone hold the throttle wide open for you and scrub the back side of the throttle plate and surrounding bore with an old tooth brush and some carb cleaner. Be sure to spray some into the small holes next to the throttle plate. That should help stabilize the idle. If it still has a problem, replace the IAC.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, November 16th, 2014 AT 4:10 AM
Tiny
JUSTINSUE
  • MEMBER
  • 1 POST
Thank you thank you :)
Was this
answer
helpful?
Yes
No
Sunday, November 16th, 2014 AT 1:56 PM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links