Jeep shut off while driving down the road, found coil wire was burned in two at coil. Put new wire on had no fire, figured coil was bad, replaced that still no fire. After looking on the Internet saw that a common problem was crank position sensor, so I replaced that, still nothing. Have checked the voltage at tps, map, cps, and camshaft position sensor, all had the 5 volts. Checked voltage at coil had 12 volts, checked all fuses, good fuel pressure, starter turns great just cannot get spark
SPONSORED LINKS
Monday, February 16th, 2015 AT 6:46 PM