Where are the fuseable links, the power distribution box located on a 95 Pontiac Grand AM?

1995 PONTIAC GRAND AM
Avatar
KEN JUDISH
  • MEMBER
  • 2 POSTS
Replaced the starter, battery and battery cables on a 95 Pontiac Grand AM. Now the car turns over but won't start. Can smell the fuel when we turn it over but it refuses to start. It didn't do this prior to putting in new parts. We were told to check the fuseablt link and fuses in the power distribution box but we can't locate either. Can you help?
May 7, 2012 at 10:25 PM
Advertisement
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
So the car started and ran good before replacing all those parts?What size engine do you have?
May 7, 2012 at 11:07 PM
Avatar
WRENCHTECH
  • ASE Certified Mechanic
  • 20,761 POSTS
  • ASE Certified Mechanic
I would suspect that you left one of the fusible link wires off the starter when you replaced it.
May 7, 2012 at 11:09 PM
Avatar
KEN JUDISH
  • MEMBER
  • 2 POSTS
2.3 L--4 cyl. Had to push start and pop the clutch to start it and only half of the battery was working prior to new parts. Just had ignition module tested and it failed. Needs to be replaced.
May 7, 2012 at 11:21 PM
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
I posted the location of the inside fuse box its on the dash as you open the drivers door.I also posted the fuse box legend if you have a bad ignition module thats one reason it wont start.
May 8, 2012 at 3:42 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.