SPONSORED LINKS

1995 Ford Contour, How do you fill the.

Tiny
ATTY
  • MEMBER
  • 1995 FORD CONTOUR
  • 156,000 MILES
1995 Ford Contour, How do you fill the hydraulic clutch reservoir when its under the dash?
Monday, November 7th, 2011 AT 12:43 AM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
You'll probably have to most of the thingslisted here to reach it.
CLUTCHÂ MASTERÂ CYLINDER

Removal & Installation (Contour & Mystique)

1. Open storage compartment door under left side of steering column and remove 3 retaining screws and 2 retaining clips to remove instrument panel. Press locking tab and lower fuse junction panel. Disconnect 2
multi plugs and unhook fuse junction panel.
2. Unplug 5 connectors from rear of fuse junction panel and remove junction panel. Remove clip retaining clutch master cylinder to pedal. Remove clip and disconnect clutch slave cylinder tube from clutch master
cylinder and plug. Remove clutch master cylinder mounting nuts and remove clutch master cylinder. Bench bleed clutch master cylinder prior to installation. To install,  reverse removal procedure.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, November 7th, 2011 AT 12:49 AM
Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
Look for the slave cylinder on the trans. You will see the cover you need to remove. Usally you replace the slave cyl. Then you bleed it.
Was this
answer
helpful?
Yes
No
+1
Monday, November 7th, 2011 AT 12:58 AM
Tiny
ATTY
  • MEMBER
  • 6 POSTS
I dont want to remove it I just want to refill it please tell me how
Was this
answer
helpful?
Yes
No
Monday, November 7th, 2011 AT 7:44 PM

Please login or register to post a reply.

Related Transmission Clutch Content

How to Check Your Clutch Operation?
VIDEO
How to Check Your Clutch Operation?
Instructional repair video
Clutch Replacement
GUIDE
Clutch Replacement
Before you replace your clutch its a good idea to see how the clutch works and the symptoms of a bad clutch. A clutch will have problems and can stop working all...
VIEW MORE

Sponsored links