Front disc brake upgrade

1994 DODGE DAKOTA
156,000 MILES
Avatar
IRVULTURE
  • MEMBER
  • 1 POST
I see a lot of guys upgrading their front brakes by swapping out the steering knuckles and all associated parts, to ones from a 2003 Dakota / Durango with larger rotors and dual piston calipers.


Think this swap would work on a 1994 Dakota?

If not, Any other options available for 1994 Daks?

Thanks!
Aug 5, 2012 at 11:26 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
you would have to check to seeif the front spindles or caliper mounts will fit to it and then probably need the newer master cylinder to compensate for the added piston capacithy. I'm sure if you lookinto wilwood they would have larger rotors and calipers for your vehicle.
Aug 5, 2012 at 11:36 PM
Advertisement