Tuesday, February 8th, 2011 AT 12:56 AM
JAVIERN
- MEMBER
- 1993 CHEVROLET CAVALIER
- 6 CYL
- FWD
- AUTOMATIC
How to replace thermostat
Fix car
1 Reply
WRENCHTECH
- MECHANIC
- 20,761 POSTS
REMOVAL
1. Disconnect negative battery cable.
2. Drain coolant and remove air cleaner assembly.
3. Remove coolant outlet to inlet manifold attaching bolt and nut.
4. Remove coolant outlet and thermostat.
INSTALLATION
1. Install thermostat in inlet manifold.
2. Install coolant outlet to inlet manifold.
3. Install attaching bolt and nut sealer and torque to 25 Nm (18 lb. Ft.).
4. Install air cleaner assembly.
5. Refill coolant. Refer to Draining and Refilling.
6. Connect negative battery cable and torque bolt to 15 Nm ( 11 ft. Lb. ). Refer to Idle Learn Procedure.
7. Inspect for leaks.
1. Disconnect negative battery cable.
2. Drain coolant and remove air cleaner assembly.
3. Remove coolant outlet to inlet manifold attaching bolt and nut.
4. Remove coolant outlet and thermostat.
INSTALLATION
1. Install thermostat in inlet manifold.
2. Install coolant outlet to inlet manifold.
3. Install attaching bolt and nut sealer and torque to 25 Nm (18 lb. Ft.).
4. Install air cleaner assembly.
5. Refill coolant. Refer to Draining and Refilling.
6. Connect negative battery cable and torque bolt to 15 Nm ( 11 ft. Lb. ). Refer to Idle Learn Procedure.
7. Inspect for leaks.
SPONSORED LINKS
Was this helpful?
Yes
No
Tuesday, February 8th, 2011 AT 1:23 AM
Related Thermostat Content
Thermostat Replacement Chevrolet Blazer
Instructional repair video
Sponsored links
SPONSORED LINKS
Thermostat Replacement Chrysler
Thermostat Replacement Dodge
