SPONSORED LINKS

What is the problem with my 92 truck?

Tiny
TPALMER
  • MEMBER
  • 1992 CHEVROLET
92 Chevy K1500 PU 305 motor, stalls out when I apply the brake.I pulled the fuse for the rear anti-lock braking system/speedometer (apparently same cicuit) I lose my speedometer and the truck no longer stalls out when the brake is applied. When I put the fuse back in, the speedometer functions but the truck stalls when the brake is applied while driving. Can you help?
SPONSORED LINKS
Sunday, January 8th, 2012 AT 12:37 AM

3 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Have you checked the ground for the brake lights yet?
Was this
answer
helpful?
Yes
No
Sunday, January 8th, 2012 AT 12:49 AM
Tiny
TPALMER
  • MEMBER
  • 6 POSTS
My brake lights are working fine
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, January 9th, 2012 AT 7:21 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Alright but if you had a bad ground to the brake lights and you stepped on the brakes it could steal the ground from somewhere else causing the dieing.I have seen it happen before.
Was this
answer
helpful?
Yes
No
Monday, January 9th, 2012 AT 8:21 PM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...
VIEW MORE

Sponsored links