1991 Pontiac Grand Am no gas or spark

Tiny
WANNE B
  • MEMBER
  • 1991 PONTIAC GRAND AM
  • 2.5L
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 150,000 MILES
This car had this problem 2 yrs ago and the crank position sensor was replaced. 6 mo. Later it reappeared again and ignition module and crank sensor was replaced under warranty. Now it has happened again so this time I did the work and replaced the crank sensor, ignition module, and the 2 coils. It still will not start. No fuel or spark. I will say that when it went bad it would not start for 3 days and then on the forth day it started. I pulled it in the garage and turned it off and the next day tried to restart and it was broken again. This is the way it was doing the first time. It would start and I would go somewhere only to have it not start later in the day. I believe the parts I installed to be of good quality so I don't know what to look for next. Is there anything else that could cause this?
Tuesday, March 3rd, 2015 AT 9:47 AM

3 Replies

Tiny
DR LOOT
  • MECHANIC
  • 2,311 POSTS
I believe you are having the immobilizer problems with the alarm system.
Was this
answer
helpful?
Yes
No
Wednesday, March 4th, 2015 AT 8:07 AM
Tiny
WANNE B
  • MEMBER
  • 1 POST
This car does not have any kind of alarm.( I recently checked grounds going to different places and they were all good. What I need is a good wiring diagram but cannot find one for this model.)
Was this
answer
helpful?
Yes
No
Wednesday, March 4th, 2015 AT 2:31 PM
Tiny
DR LOOT
  • MECHANIC
  • 2,311 POSTS
I have access to Mitchell manuals online I would be happy to send you all the wiring diagrams you need, problem is we are having problems with our manuals right now and I cannot access them maybe in a couple of days we will be back online while you message me back next week and remind me to send you the wiring diagrams and tell me which sections you want
Was this
answer
helpful?
Yes
No
Wednesday, March 4th, 2015 AT 8:41 PM

Please login or register to post a reply.

Sponsored links